How To Fix Apex Legends Code Dam Network Error Generic Overflow… | TGG

How To Fix Apex Legends Code Dam Network Error Generic Overflow (Solved)

Code Dam is a Generic Overflow error that can cause players to get disconnected during matches. Here's four methods you can use to fix these
How To Fix Apex Legends Code Dam Network Error Generic Overflow (Solved)




Apex Legends error Code Dam is a common error code that is similar to Code Leaf and Code Net errors in the way that it also indicates a possible issue with Apex Legends servers which can be caused by an unstable internet connection or any other network issue in general. This article will explain what Code Dam is and will provide some quick solutions to help you fix the error as well.

What Is Apex Legends Error Code Dam?

Apex Legends Code Dam is triggered when Apex servers receive or transmit more data than they can handle, causing their buffers to overflow. This is why the error is also called the Network Error: Generic Overflow. Code Dam is not a rare error code and can be experienced frequently by players. A list of some of the common error codes in Apex Legends can also be seen below.

What Causes Apex Legends Error Codes Dam?

Apex Legends error Code Dam Network error can be caused by a number of issues, not all of which can be determined so easily but the main reason behind the error is a poor internet connection. Issues such as packet loss, high latency, corrupt game files, and malfunctioning Apex servers can all cause a communication failure between EA servers and the client.

Fortunately, the similar nature of Code Dam to other network errors in Apex, allows us to implement some new and some previously documented fixes to resolve the problem.

Method #1: Test Your Internet Connection

Since the prime culprit behind the Network Error Generic Overflow is an unstable network connection, the first step you should do is to check your local connection for any faults or discrepancies. You can do this by conducting a speed test at FAST or Speedtest. High ping or increased packet loss/jitter will indicate an issue with your connection.

Speedtest

In case of abnormal values, try restarting your router by following the steps below.

  1. Press and hold the router’s power button to turn off the router.

  2. Remove the power cord and wait for 10 seconds.

  3. Reconnect the cable and turn it ON.

This will reset your connection, hopefully removing any discrepancies from the system and fixing the Network Error Generic Overflow error.

Method #2: Verify the Integrity Of Apex Legends Game Files

Another common cause for the Code Dam error is damaged or missing game files. Game files can sometimes become corrupted after large updates or due to other bugs and glitches. You can follow the steps below to verify the integrity of such files.

Verify Integrity Of Game Files
  1. Launch the Steam application.

  2. Go to your Game Library.

  3. Right-click on Apex Legends and click on Properties.

  4. Lastly, go to Local Files and click on Verify Integrity of Game Files.

Steam will fetch corrupt and missing game files and replace them with new ones, fixing any error codes you may be facing, in the process.

Method #3: Switch To A Different Game Server

Apex Legends Network Error Generic Overflow is an error message that can be caused by a fault in the game servers. This can be checked by visiting EA’s help center or third-party sites such as Apex Legends Status to see if Apex servers are working normally or not.

If the issue is with a particular server you can try switching to a different game server temporarily to resolve the Generic Overflow error. You can follow the steps below to do that.

Apex Legends Data Centers
  1. Launch Apex Legends.

  2. Wait for 1 minute and then press ESC twice to open the Data Center.

  3. Choose an alternate server from the list.

This will connect you to an alternate server that is working normally and as a result, will also fix Apex Legends Generic Overflow error message.

Method #4: Try Reinstalling Apex Legends

The last resort method to fix Code Dam is to try and reinstall Apex Legends. This process will completely rid the game of any local errors and a fresh version will be installed. This may be a lengthy process for some but will ensure that any glitches in the game are removed.

Reinstalling Apex Legends
  1. Launch the Steam application.

  2. Go to your Game Library.

  3. Right-click on Apex Legends and click on Manage.

  4. Select the Uninstall option.

You can then proceed to download and install the game again. All necessary prerequisites will also be automatically installed on your device to ensure smooth operation.

Share
URL Copied